Shelburne Area Tour

Showing our stuff at Shelburne Farms  Gael Boardman’s 1918 Locomobile

Lake Champlain  There was an international bicycle race in Burlington on the 18th of August with many roads closed to cars. That only meant the VAE had to get up earlier for our tour start at Wake Robin at 8:30AM. After a grand welcome and breakfast treats from the Wake Robin folks the tour started with many Wake Robin residents joining us. The tour included Shelburne Farms and a wonderful loop into Charlotte where we even found the ‘shortest covered bridge in the world’. The pictures will tell the rest of the story.Charlie Thompson doing “donuts” with his Whippet

Penetrating Fluid 101 – Dave’s Garage

I have passed along the tip of using a 50/50 mixture of ATF and Acetone as an alternative to penetrating oil. Anybody who has turned a wrench on a daily driver, or restored their pride and joy knows what happens to all the hardware on our vehicles here in the wet, snowy salty northeast. There is a reason the northeast is referred to as the rust belt.

I have used both PB Blaster and Liquid Wrench for years. Of the two, I had a preference for PB Blaster.

I have mixed up the ATF/Acetone mixture for small jobs, but found it to be time consuming and hard to brush the mixture on to frozen hardware as needed. I recently bought an inexpensive oil can and filled it with the ATF/Acetone mixture. This will be my dedicated penetrating fluid can. I will use this as my first plan of attack when I am confronted by frozen hardware, and report back with the results. I’m already quite pleased with the savings. This concoction is a lot more economical than com-mercially available penetrating oils. Word of caution: Acetone is a solvent, and will mar paint and plastics.

Not convinced? Here’s the cold, hard facts from the April/May 2007 edition of Machinist’s Workshop. They did a test of penetrating oils where they measured the force required to loosen rusty test devices. The results reported were interesting. (The lower the number of pounds the better).

Penetrating oil Average load Price per fluid ounce

  • None …………………516 pounds
  • WD-40 ………………238 pounds ……$0.25
  • PB Blaster …………214 pounds .. $0.35
  • Liquid Wrench ……127 pounds ……$0.21
  • Kano Kroil …………106 pounds ……$0.75
  • ATF-Acetone mix…53 pounds ……. $0.10

 


  • Please email all inquiries to: Dave
    or snail mail
    32 Turkey Hill Road
    Richmond VT 05477